On The Characteristics of Beam Type Shelf

Heavy beam rack, also known as pallet rack, is the most common form of shelf in various storage rack systems in China. It is the rack system with the simplest structure and the lowest equipment cost among all the pallet storage equipment systems, and it is convenient to install and debug. It can select each tray of the system freely. The rack is a fully assembled structure in the form of column + beam. The column and beam are cold-rolled and connected by professional plug-in hanger. It has good rigidity, safety, reliability and large load-bearing. Let's get to know it.

1. The structure of the crossbeam rack is simple, safe and reliable. It can be adjusted and combined at will, and the goods in and out of the warehouse will not be limited by the order of the goods. It is widely used in pallet storage and forklift storage.

2. The column piece of beam type shelf is composed of column, cross brace and diagonal brace connected by screws. The shelf frame is composed of column piece and C-type welding beam, which is fixed by safety pin, and the structure is simple and reliable. Each layer can be adjusted up and down at a pace of 75mm.

3. With the size of column and beam, the beam rack can determine the layer load requirements. The maximum floor load of each layer can reach 5000kg / layer under the relative design.

4. The height of a single column of the crossbeam shelf can reach 12 meters. The plastic shape of the cross beam shelf is very large. Mold shelf and attic shelf are built on the basis of pallet shelf.

5. Beam rack can effectively improve the storage height of the warehouse and improve the space utilization rate of the warehouse. It is suitable for storage of various types of goods.

6. The shape of the crossbeam rack is safer, which can prevent the forklift from hitting, and can also increase the column foot protection and anti-collision bar. In order to ensure the safety of the layer load, the beam supporting block, the layer plate and the mesh span beam can be installed on the beam.