Similarities And Differences Between Loft Type Shelf And Steel Platform

The loft type shelf and steel flat table shelf are based on the support parts. In the limited land area, the utilization rate of the shelf to the site is improved from the height direction, so as to improve the storage capacity and the utilization rate of the site. But even though the two are similar, they are slightly different. In this regard, spieth shelf will start from various aspects, and analyze the similarities and differences between loft type shelf and steel platform.

一、 Similarities

1. The shelf in the attic can be built into two or three floors, just like the steel platform. Besides the bottom floor, other floors can be paved with steel plates to let the cart and personnel walk on the floor by themselves;

2. Both of them need to design stairs, and both need to be equipped with cargo loading and unloading ports, so as to facilitate the user to allocate goods at any time;

3. Both of them can set up office area inside the shelf as needed;

4. Both of them are fully assembled structure, which is convenient for disassembly;

二、 Differences

1. The loft type shelf is supported by beam type shelf or medium-sized shelf, while the steel platform is supported by H-shaped steel and other profiles;

2. In terms of floor design, the attic rack can be designed into mesh layer plate and steel plate according to the demand, while the steel platform is usually galvanized plate;

3. Under the same area, the cost of steel platform is higher than that of attic shelf;

4. Due to the different structure, the steel platform using primary and secondary beams and H-beam, will be more robust than the attic shelf supported by shelf.

Although the two have similarities and differences, but in the process of use, both can achieve the same function, only from the different industries for which they are applicable. Therefore, the specific design type is still based on the specific use needs of customers, so as to achieve better results.