How to use the through shelf correctly

The drive in shelf has been used by many large enterprises, and we can also see the high economic benefits brought by the drive in shelf to the enterprise. Then we need to pay more attention not only to this item, but also to how to better use the drive in shelf to maximize the economic benefits. How can we use the drive in shelf correctly?

1) In order to make better use of the drive in shelf, it should be noted that when designing a new warehouse or transforming an existing warehouse, the system characteristics applied in the warehouse should be reviewed and studied. For example, if you want to achieve the maximum storage capacity in the smallest space of the drive in shelf, you need to choose a reasonable and economical logistics scheme.

2) When using the drive in shelf, it is necessary to load and unload from one side. This cargo access mode can effectively improve the time efficiency and work efficiency;

3) The drive in shelf is a continuous shelf that is not divided by channels, so the tray needs to be stored on the support guide rail (ox leg beam) according to the depth direction and needs to be stored closely, which makes high-density storage possible;

4) The through shelf can be divided into one-way and two-way arrangement according to the picking direction. The total depth of one-way (wall area) shelf should be controlled within 6 tray depths, and the total depth of two-way (middle area can be picked up on both sides) shelf area should be controlled within 12 tray depths, In order to improve the efficiency and reliability of forklift access (in this kind of shelf system, the forklift is a continuous "lifting and hitting" operation mode, and the forklift is easy to shake and hit the shelf, so whether the stability is fully considered is very important).

5) For the drive in shelf, the stability of its storage system is weak, so the shelf should not be too high, which usually needs to be controlled within 10m. In order to strengthen the stability of the whole shelf system, in addition to larger specifications and selection, it is also necessary to add a pulling device;

6) When using the drive in shelf, the single pallet goods should not be too large and heavy, the weight can generally be controlled within 1500kg, and the pallet span should not be greater than 1.5m; The forklift usually equipped is a forward moving battery forklift or a balance weight battery forklift;

7) Because the goods stored in the drive in shelf are relatively dense, the stability requirements are very high. For this, there are relatively many shelf accessories. Generally speaking, the accessories are connected with the shelf column pieces, so that the goods can be safely and intensively stored on the corbel beam to maximize the use of space.